Steel table top without beams DSW, 700mm deep in many lengths
STEEL TABLE TOP:
Our steel products are food approved.
All our steel tables, steel table tops, etc. is produced to order, which allows for special solutions.
The material is the stainless steel type AISI 304.
The steel tables are solid, stable and are welded together.
The table tops have steel braces on the underside, but are hollow inside.
DRAWING:
Before a steel table top is produced (possibly with a sink), the manufacturer prepares a 3D drawing, unless otherwise stated by the seller. It typically takes a week to draw, after which you will receive it by email. Before you approve the drawing, it is important that you check that the drawing is correct, as the item is produced after the drawing.
DELIVERY TIME:
It's about. 3-4 weeks delivery time, after the drawing is approved. If you have an urgent order, you can let us know. We will then hear about the possibility of faster delivery, but the delivery time is always up to the manufacturer.
SINCE THE STEEL TABLE PLATES ARE PRODUCED TO ORDER, WE MUST KNOW THE FOLLOWING:
It is optional if a trailing edge (60 mm) is desired on the item. Whether there is a trailing edge or not does not affect the price.
It is possible to get the table with sink at an additional price of DKK 1495 excl. VAT. There are different sizes of sinks to choose from (see the section "sinks").
Since the sink can be placed anywhere on the table top, we need to know where it is to be placed.
Whether to make a luminaire hole (Ø 35 mm) at no extra cost. The faucet hole can be placed behind the sink on the left, in the middle or on the right.
The sink drain is placed in one of the 4 corners.
There are several different options for acquisitions (see the section “acquisitions”).
We have the opportunity to produce a lot within steel products, so finally contact us if you have special wishes.
CAPABILITY:
Shelves generally take 60 kg. Table tops 80 kg.
For machines that must be on the table where the weight is higher than above, this must be stated to the seller. In collaboration with the factory, it is assessed whether it is possible to meet.
WASH:
Small sink: Length x depth x height in mm: 300 x 240 x 150 mm. Waiting time may occur on this sink.
Standard wash: Length x depth in mm: 340 x 240 x 150/340 x 240 x 200/340 x 400 x 200/400 x 400 x 200/400 x 400 x 250/400 x 400 x 300/400 x 500 x 250 / 500 x 400 x 300/500 x 500 x 250/500 x 500 x 300
Large sink: A possible larger sink (min. 500 x 600 x 320 mm) costs DKK 995 excl. VAT in addition.
Wash size: Since the wash needs to be able to wear, the wash must be min. 200 mm less in depth than the depth of the table top. Ie If you have chosen a table top of 600 mm in depth, the sink can measure a maximum of 400 mm in depth.
Stock is delivered with 95% probability already on the first working day after your order, if you have ordered before 13.30:XNUMX.
When you shop at www.cateringinventar.dk you can either choose to pick up the item yourself at our warehouse in Ikast or you can have the item shipped with Danish freight forwarders or GLS. If you want the item sent to you, remember to check the item on the pallet for any damage before you sign for receipt. You may request to have "received subject to reservation" added. This means that you have made a reservation for any damage you may have seen to the item and which you believe is due to the transport. Then you will receive the item and you can call us. If you receive an item that is damaged during transport without reservation or without checking it first, then it is unfortunately your responsibility as a customer and we can not do anything as we can not claim compensation from the carrier.
Call on tel. 20280274
Send an email to [email protected]
Get an offer for your old kitchen machine
Many kitchen appliances can be given new life. Every year, we buy back many machines of all makes, which we refurbish and sell again. Therefore, get an assessment of your old machine.
"*" indicates required fields
Finance
If you want to get your goods financed, we have both our own financing company and external partners. You can find our calculator and application form here:
Calculate and apply here"*" indicates required fields
"*" indicates required fields
Related items
-
Steel table with sliding doors, 700 mm deep and in many lengths
STEEL CABINETS: Steel cabinet with sliding doors and 1 shelf, model DPN - Length 1000-1700...From 6.349,00 DKK e.g. VATWe price match -
Steel cabinet with hinged doors, 700 mm deep and in many lengths
STEEL CABINETS:- Length 800-1200 mm, 2 doors and 4 legs- Length 1300-1700 mm, 3…From 6.019,00 DKK e.g. VATWe price match -
Save up to 43%
Steel table with lower shelf and rear edge and wooden insert - Tecnodom
The steel tables are in stainless steel, with a back edge and lower shelf. These tables have…From 1.698,00 DKK e.g. VATWe price match -
Steel table DSR, 700mm deep in many lengths
STEEL TABLES: We have a series of steel tables in stock, but basically…From 2.482,50 DKK e.g. VATWe price match -
Washbasin 800x600x(H)850 mm, Hendi
Dimensions: 800x600x(H)850 Made of stainless steel. Welded construction…3.999,95 DKK e.g. VATWe price match
